Each month, I am making two blocks from my scraps, in the colorway of the month for the
Rainbow Scrap Challenge.
The blocks are similar to a traditional pattern called Kite Tails.
To create one 12" block:
Start by selecting FIVE background fabrics (or one!). Trim each to 3.5" wide x 19".
Select FIVE print fabrics. Trim each of these to 1.5" wide x 19".
Lay them out in an order that pleases.
(Note: The second colored strip will end up being in the center, running diagonally across the block)
Using a 1/4" seam allowance, join all the rows to create one rectangle, approx. 19" x 21" wide.
Press the seam toward the skinny, colored strips.
Align the pieced unit on your cutting mat, and cross-cut Twelve(12) 1.5" wide strips.
Starting from the bottom of the 12 strips, slide them to the right, so that they stagger.
(My pink strip was short, please pretend there are two full squares of pink are present at the top-left!)
It'll look like this:
A note about block direction: So far, I am making all my blocks the same direction, sliding the strips to the right as I go up. I may switch later in the year, to make half of my blocks slide to the left)
OK, next we need to "square it up", to prepare the strips for piecing.
I think of this as a vertical 'datum line' that needs to be created,
The line will run vertically up, from the left edge of the second print (this print will be the bottom-left corner of the block)
My method to create this line is to remove the stitching from the that first seam, on the bottom row.
Seams will need to be removed every third row, running vertically from there.
Once these are removed, the second and third strips can be cut with a rotary cutter.
BTW, use a seam ripper very carefully for these.
So as not to distort the pieces, I cut several stitches from one side,
then remove the thread from the other.
Create a vertical line on the right side as well, removing stitches and cutting each strip, upward from the left-edge of the fourth colored square.
Next, use the pieces that have been removed to fill in and complete the rows, until your strips line up on the vertical edges.
Once you have them all laid out, go ahead and join them together!
Match and nest the corners as you sew the rows together.
I use a smaller stitch size here because I'll be pressing these final seams open.
Oh My, look at all those leftovers!
Ta-Da!
Using leftovers to make borders as I go:
I
had thought I would create a way to make the block that did not create so much waste, but instead I am using the leftovers to make blocks that I plan to use in the quilt layout - probably the border...
Line up the leftovers and cut them apart through their centers.
Use your seam ripper to remove any background pieces that are too small, and sort all the pieces into stacks so you can complete as many units as possible.
For now, I am joining these together in groups of eight, the perfect length for a block when these are set on point.
Want to add a heart to your blocks?
Just replace one square with a piece 2.5" by 1.5".!
So Cute!
Did I mention I LOVE making these blocks!
Every month, I look forward to the new color announcement so I can reveal more of this quilt!
Until April, they are safely stowed..
The linkup is hosted by Jan at Sew and Sow Farm, on the first Saturday of each month!
Jan is launching a Little Dresses for Africa SewAlong,
with a tutorial and more information posted today!
